Mighty-Miter

Seatek Company is expanding its line of labor saving tools with a new concept in reciprocating saw accessories.

Reciprocating Saw Accessory
Cuts Virtually Anything
Perfectly Square!

• This labor saving accessory makes it a snap to cut at a right angle almost any material:  round, square, or rectangular tubing, wood or plastic molding, angle bar, EMT, Unistrut^®, threaded rods, etc.
   

• The Mighty-Miter can be attached to many different Milwaukee^® or DeWalt reciprocating saws.  Just select the proper model for your brand - no modification required. 
   

• The unique clamping system can be quickly adjusted to accept all different sizes of material from 3/16” to 2”. 
   

• The clamping bar is designed with a chamfer at the tip to permit the clamping of very small rods.  A portion of the clamping bar is grooved to prevent round material from slipping.

• The Mighty-Miter can be easily removed.  This permits the reciprocating saw to be used as a conventional saw by simply reinstalling the standard shoe.
   

• Easily cut long lengths of material right on the ground!  Simply clamp the material in the vee, start the saw and apply downward pressure.  The clamping assembly is designed to automatically swing upward which provides an easy way to cut heavy or large size material in place.
   

•  With a simple turn of a thumb screw material is clamped in the vise & swung upwards to make a perfectly square cut.
   

• Angle cuts can be made on the ends of some flat material up to ˝" thick by simply using the clamping system to secure it at an angle.

Models Available