RM-202AA

Seatek
392 Pacific Street
Stamford, CT 06902

Strip BX & Cut Flex
The Easy Way!

INCREASE
PRODUCTION
AND
CUT COSTS!

The ROTOMATIC RM-202AA with automatic cable cutting drastically cuts labor time insuring clean, fast stripping without damaging the wire inside the cable. Never use a hacksaw again! Simply set the length to be stripped, insert the cable until it activates the sensor. The Rotomatic will then automatically make the cut, sending the clamping pin down which in turn drives the cable over the motorized cutting wheel, splitting the armor casing. To remove the armor just untwist the cable until the casing slips off! An adjustable stop permits varying the depth of cut for different cables. The RM-202AA's cutting action is driven by a large air cylinder providing fast and smooth operation.

Automatic cable cutting lets the operator repeat the same length every time, dramatically speeding up operations
Prevents operator fatigue with quick, one-handed operation
Ideal for making "Whips" & stripping MC/BX cable in precut lengths
Eliminates deburring and nicking of wires
Equipped with a top quality gear-motor for extra-long life.
Adjustable cable clamping wheel with lateral adjustment for different cable pitches
Other features include fast circular cutter replacement and safety shield
For faster production, two RM-202AA's can be placed side by side, allowing the operator to strip two ends at the same time!
RM-202AA requires 40 psi air pressure. Each machine includes a pressure regulator, air gauge & large valve actuator.
Dimensions: 8"H x 7"W X 11"D, 24 lbs., 115 VAC.

The front of the ROTOMATIC is protected by an unbreakable Lexan� shield. To insure safe operation the adjustable blade guard is integral to the cutting action and depth of cut setting on the RM-202AA. The clean cut parallel to the cable axis eliminates deburring of flexible conduit ends. This feature prevents damage to the wire's insulation caused by sloppy manual deburring. For best results we recommend the use of screw clamping and squeeze type connectors. (Check your local electrical code)

Other Available Rotomatic Models


RM-202A Cuts 3/8" trade size flex & strips armored BX & MC cables from AWG #14-2 to #8-4 (7/16" to 5/8" O.D.) Cuts 1/2" trade size with SP-203 pin	RM-202M Cuts 3/8" to 1/2" trade size flex & strips armored BX & MC cables from AWG #14-4 to #4-4 (7/16" to 7/8" O.D.)


RM-202B Special model to cut 3/8" to 3/4" trade size Flex and strip armored BX & MC cables from AWG #14-2 to AWG #2-4 (7/16" to 1" O.D.)	RM-202C Special model to cuts 3/4" to 1-1/4" Flex & strips armored BX & MC cables.

RM-202 Movie

Move your mouse pointer
over photo to see a demo of the RM-202A

Model	Trade	AWG	O.D.	Trade Size / Pin

RM-202A	3/8" and 1/2"	#14-2 to #4-4	0.42" to 0.92"	3/8" LP-269 1/2" SP-203
RM-202AA	3/8"	#14-2 to #10-4	0.42" to 0.70"	3/8" AA-130
RM-202M	3/8" and 1/2"	#14-4 to #4-4	0.42" to 0.92"	3/8" & 1/2" LP-269
RM-202B	3/8" to 3/4"	#14-2 to #2-4	0.42" to 1.10"	3/8" LP-269 1/2" SP-203 3/4" SP-233
RM-202C	3/4" to 1-1/4"	#4-4 to #1-3	1.0" to 1.70"	3/4" to 1" SP-282 1-1/4" SP-203

Flex & AWG cable sizes vary from manufacturer, confirm size by measuring actual O.D.

ACCESSORIES

LS-105 Lubricant Stick Use on all models of the Roto-Split & Roto-Flex to increase the life of your blades!	LP-269 Clamping Pin Pin Used on the RM-202AA to allow it to cut 3/8" Flex
B-108 Replacement Blade Standard Blade for the RM-202 (All models) Also for use on the RS-101AP	B-103 Replacement Blade Fine tooth blade used on power tools to cut thin-wall flex

SATISFACTION GUARANTEED
OR YOUR MONEY BACK!

LIMITED WARRANTY: The Rotomatic has a limited warranty against defects of material or workmanship for 90 days excluding the battery pack, charger and circular cutter.